Instron 2712 Series User Manual

Compatible Jaw faces M10-14179-EN
2-16
2712-003
2712-004
2712-016
2712-018
2712-020
2732-003
2732-004
2732-008
2732-009
2702-011 Smooth ground 12 x 38 (0.5 x 1.5)
2702-012 Rubber coated 12 x 38 (0.5 x 1.5)
2702-013 Serrated 12 x 38 (0.5 x 1.5)
2702-014 Smooth ground 25 x 38 (1.0 x 1.5)
2702-015 Rubber coated 25 x 38 (1.0 x 1.5)
2702-016 Serrated 25 x 38 (1.0 x 1.5)
2702-017 Smooth ground 50 x 38 (2.0 x 1.5)
2702-018 Rubber coated 50 x 38 (2.0 x 1.5)
2702-019 Serrated 50 x 38 (2.0 x 1.5)
2702-020 Line contact 25 x 2.3 (1.0 x 0.09)
radius convex surface
2702-031 Smooth ground 25 x 25 (1.0 x 1.0)
2702-032 Rubber coated 25 x 25 (1.0 x 1.0)
2702-033 Serrated 25 x 25 (1.0 x 1.0)
2702-034 Smooth ground 76 x 25 (3.0 x 1.0)
2702-035 Rubber coated 76 x 25 (3.0 x 1.0)
2702-059 Serrated 76 x 25 (3.0 x 1.0)
2702-062 Line contact 76 x 2.3 (3.0 x 0.09)
radius convex surface
2702-044 High friction compound 25 x 38 (1.0 x 1.5)
2702-045 High friction compound 50 x 38 (2.0 x 1.5)
2702-060
b
Waved profile 75 x 50 (3 x 2)
a. Only available for the 2712-019 grips.
b. Jaw face 2702-060 does not apply to 2712-018 and 2712-020 grips.
Table 2-14. Compatible Jaw faces (Continued)
Grip Model
Jaw face
Catalog Number Surface Type
Clamping Area
(width x height)
mm (in)

Instron 2712 Series Specifications

General

Brand	Instron
Model	2712 Series
Category	Control Unit
Language	English