Name: Integra DTR-7.3
Brand: Integra
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Index parts and facilities

Remote controller

The RC-514M is a multi-functional remote controller. The

instructions given here only explain how to use the remote controller

in conjunction with the DTR-7.3. To operate the DTR-7.3 using the

remote controller, first press the RCVR Mode button to place the

remote controller in the receiver mode.

Before Using Important Safeguards2
Precautions3
Contents4
- Table of Contents4
Features6
Supplied Accessories6
Before Using this Unit7
- Installing the Remote Controller Batteries7
- Using the Remote Controller7
Index Parts and Facilities8
- Front Panel8
- Front Panel Display10
- Remote Controller11
- Rear Panel13
Connecting to Audio/Video Equipment14
- Connecting Your Audio Components15
- Connecting Your Video Components16
Connecting Speakers20
- Ideal Speaker Configuration20
- Minimum Speaker Configuration for Surround Sound Playback20
- Speaker Placement20
- Connecting Speakers21
- Using the Speaker Labels21
Connecting Antennas22
- Assembling the am Loop Antenna22
- Connecting the am Antenna Cable22
- Connecting the Included Antennas22
- Connecting an FM Outdoor Antenna23
- Connecting an am Outdoor Antenna23
- Directional Linkage23
- Connecting the Antenna Cable to the 75/300 Ω Antenna Adapter23
  - (Australian Models Only)23
Connecting the Remote Zone (Zone 2) Speakers24
- When Using the SURR BACK/ZONE 2 SPEAKERS Terminals24
- When Using the SURR BACK/ZONE 2 PRE out Terminals24
- When Using the ZONE 2 out Terminals24
Operating Components Not Reached by the Remote Controller Signals (IR IN/OUT)25
- If the Remote Controller Signal Does Not Reach the DTR-7.3 Remote Sensor25
- If the Remote Controller Signal Does Not Reach Other25
  - Components25
Miscellaneous Connections26
- Connecting for Remote Control ( )26
- Connecting the Power Cords from Other Devices26
- RS 232 Port26
- Ac Inlet26
- Connecting to an External Device with 12V TRIGGER Terminal27
- Connecting to Devices with Analog Multi Channel Output27
- Connecting Auxiliary Power Amplifier27
Connecting the Power28
- Turning on the Power28
- Turning on the Power from the Remote Controller28
Enjoying Music or Videos with the DTR-7.329
- Basic Operation29
- To Change the Display of the Input Source from TAPE to MD29
- Temporarily Turning off the Sound30
- Adjusting the Bass and Treble30
- Listening with Headphones30
- Using the Sleep Time (Remote Controller Only)30
- Changing the Listening Mode31
- Switching the Display32
- Adjusting the Brightness of the Front Display32
- Temporarily Changing the Speaker Output Levels32
- Changing the Audio Mode33
- Enjoying the Multichannel Output33
Listening to Radio Broadcasts34
- Tuning into a Radio Station34
- Listening to a Stereo Radio Station (FM Mode)34
- Presetting a Radio Station35
- Selecting a Preset Radio Station35
- Erasing a Preset Radio Station35
Enjoying Music in the Remote Zone36
- Using the Buttons on the DTR-7.336
- Using the Remote Controller36
- Adjusting the Volume for the Remote Zone36
Recording a Source37
- To Record the Input Source Signal You Are Currently Watching or Listening to37
- To Record an Input Source Signal Different from that You Are Currently Watching or Listening to38
- Recording the Video from One Source and the Audio from Another38
Setup Menu39
- Navigating through the Setup Menu40
Hardware Setup41
- Speaker Impedance Sub-Menu41
- Surr Back/Zone 2 Sub-Menu41
- IR in Setup Sub-Menu42
- Hardware Setup Menu41
Speaker Setup43
- 1 Speaker Setup Menu43
- Speaker Config Sub-Menu43
- Speaker Distance Sub-Menu44
- Level Calibration Sub-Menu45
Input Setup46
- 2 Input Setup Menu46
- Digital Setup Sub-Menu (When NET AUDIO Is Not Selected as the Input Source)46
- Multichannel Setup Sub-Menu (When NET AUDIO Is Not Selected as the Input Source)47
- Video Setup Sub-Menu48
- Character Input Sub-Menu49
- Intellivolume Sub-Menu49
- Listening Mode Preset Sub-Menu50
- Trigger Setup Sub-Menu52
Audio Adjust53
- 3 Audio Adjust Setup Menu53
- Surround Speakers Sub-Menu53
- Tone Control Sub-Menu53
- Delay Sub-Menu54
- Sound Effect Sub-Menu54
- LFE Level Sub-Menu55
- Mono Sub-Menu55
- Theater Dimensional Sub-Menu55
- Surround Sub-Menu56
- Mono Movie/Enhanced57
- Orchestra/Unplugged/Studio MIX /TV Logic Sub-Menu57
- THX Sub-Menu57
Preference59
- 4 Preference Menu59
- Volume Setup Sub-Menu59
- Headphones Level Setup Sub-Menu60
- OSD Position Sub-Menu60
- OSD Setup Sub-Menu60
Remote Controller61
Using Remote Controller61
- Overview61
- Controlling an Integra/Onkyo Cassette Tape Deck61
- Controlling an Integra/Onkyo DVD Player62
- Controlling an Integra/Onkyo CD Player63
- Controlling an Integra/Onkyo MD Recorder64
Entering a Pre-Programming Code65
- Learning a Pre-Programming Code65
- Pre-Programming Codes66
Operating Your Programmed Remote Controller67
- DVD Mode (DVD Player Mode)67
- SAT Mode (Satellite Tuner Mode)67
- Cable Mode (Cable Mode)67
- VCR Mode (VCR Mode)68
- TV Mode (TV Mode)68
Programming the Commands of Remote Controllers for Other Devices into the Remote Controller69
- Programming Procedure69
- Erasing the Programmed Command from One Button70
- Erasing All the Commands Programmed under a Mode Button70
Using the Macro Function71
- What Is the Macro Function71
- Programming the Macro71
- Executing the Macro71
- Erasing a Macro from the Macro 1 (or 2) Button72
- Erasing All Commands and Macros that Have Been Programmed72
Troubleshooting Guide73
- Power73
- Speakers73
- Fm/Am Tuner73
- VIDEO and AUDIO74
- Remote Controller74
- Other74
- If One of the Messages Shown below Appears75
Specifications76
- System Requirements77
- Enjoying Internet Radio79
- Configuring Various Settings82
- Network Setup Menu82
Appendix Troubleshooting Guide84

Integra DTR-7.3 User Manual

Table of Contents

Other manuals for Integra DTR-7.3

Questions and Answers:

Integra DTR-7.3 Specifications

Related product manuals

Brand	Integra
Model	DTR-7.3
Category	Receiver
Language	English