Integra DTR-7.3 User Manual

35
Selecting a preset radio station
1. Press Tuner input source button on
the DTR-7.3 or TUN button on the
remote controller. The front display
should show the currently selected
frequency.
2. Press the Preset
/ buttons and
select the number of the desired
preset station.
When using the remote controller:
1. Press the RCVR Mode button.
The RCVR MODE button lights.
2. Press the TUN button.
3. Press the CH
button and select the number of the
desired preset station.
Erasing a preset radio station
1. Press the Tuner input source (or TUN) button and
press the Preset
/ buttons to select the preset radio
station that you want to erase (see above).
2. Press and hold the Memory button and then press the
FM Mode button.
The selected preset station is erased.
Listening to Radio Broadcasts
Tuning
Preset
Tuning
Preset
CH
TUN
RCVR
FM Mode
Tuner
Preset
/
Memory
ch
Presetting a radio station
1. Tune into the radio station you desire (see “Tuning
into a radio station” ).
2. Press the MEMORY button on the
front panel.
3. Using the PRESET
/ buttons,
select a preset number (from 1 to 40)
to assign the station.
4. Press the MEMORY button to finalize
the procedure.
This programs the radio station as a preset radio station.
• Up to 40 stations can be stored in memory as preset radio
stations.
• You can enter text names for any of the preset radio stations
(see page 49).
ch
ch

Integra DTR-7.3 Specifications

General

Brand	Integra
Model	DTR-7.3
Category	Receiver
Language	English