Intek KT-355EE - Managing Scan Operations; Canceling Active Scan; VFO Scan Operation Details; Memory Scan Execution Modes

(21
Cancelling scan Operation
.Press the # CL PS key.
CLPS
+ Scan IS cancelled
(3) Other Points regarding VFO scan
1) The drsplay durtng 1 MHz scan. full band scan and pro-
gram scan IS rdentrcal
2) Pressing the A iV keys during a scan pauses scan
Operation
To restart, press the A iV keys again
3) The scan drrection tan be changed, dependrng on the
key used to restart it
Pressung the A key twrce during scan Operation
swtches to upward scan (lower to higher frequencres)
Pressing the V key twrce during scan Operation
swrtches to downward scan (hrgher to lower frequen-
cies)
(4) Using memory scan
(1) Memory scan
Press the ++ MS MS.M key (Memory scan 1s actrvated )
If all memory address numbers are free. a boo (lang
medium pitched beep) Sounds and no scan IS imtiated
(2) Block memory scan
The memory address numbers from MO0 to M39 are
divrded tnto four blocks. and the block of your chorce IS
scanned.
The memory address number block assignments are as
follows
Block 0 MO0 -
MO9 are scanned
Block 1 MlO - M19 are scanned.
Block 2 M20 - M29 are scanned
Block 3. M30 -
M39 are scanned.
1) Press the 3t MS MS M key to actrvate memory scan
2) Press the numerrc key correspondfng to the number of
the block (0
- 3) you wish to scan.
Block memory scan begins.
If all memory address numbers rn the specrfied block
are free, a boo (lang medium pttched beep) Sounds and
no scan IS rnmated
3) To return to memory scan, press the * MS MS M key
36