Intek KT-355EE - Dual Watch Monitoring; Overview of Dual Watch Function; Dual Watch Operation Type Combinations; Setting Up M00 and VFO Dual Watch

Dual Wa tch ODera tion
H Receiving Signals on two frequencies
alternately
This functlon IS called dual watch It allows you to momtor one
of the memory frequencles (MO0 - M39) or the cal1 frequency
and the VFO frequency alternately
During dual watch operabon, the memory frequency IS
recelved (and appears on the dlsplay) once every three sec-
onds. This Status IS referred to as dual watch mode
Dual watch Operation types
l The following four types of dual watch Operation are pos%-
ble.
(1) The MO0 frequency and VFO frequency
(2) A memory address number of your choice and the VFO
frequency
(3) The cal1 frequency and VFO frequency
(4) Memory scan and the VFO frequency
(See page 35 for details of the memory scan function )
Using the dual watch function
(1) The MO0 frequency and VFO frequency
1) Stare one of the frequencles you wish to use for a dual
watch Operation In memory
MO0 frequency
2) In the VFO mode. select the other frequency
“FO frequency
1----
3) Whtle still In the VFO mode. hold down the FUNC key
and press the 2 DUAL key. The DUAL Indication
appears on the display and dual watch operatlon com-
mences using the MO0 frequency and the VFO fre-
quency
41