Intek KT-355EE - Dual Watch Combinations and Communication; Memory Address and VFO Dual Watch Setup; Call Frequency and VFO Dual Watch Setup; Memory Scan and VFO Dual Watch

(2) A memory address number of your choice and the
VFO frequency
1) In the VFO mode, select the frrst dual watch frequency.
2) In the memory mode, select the other frequency from
among the memory address numbers wrth frequencies
assigned (Or store a frequency In memory )
3) Whrle still In the memory mode, hold down the FUNC
key and press the 2 DUAL key.
The DUAL rndrcatron appears on the drsplay and dual
watch operatron commences usrng the memory address
number frequency of your chorce and the VFO fre-
quency
(3) The CALL frequency and VFO frequency
1) In the VFO mode, select the first dual watch frequency
2) Press the CALL key.
3) Hold down the FUNC key and press the 2 DUAL key
The DUAL rndication appears on the display and dual
watch operahon commences using the cal1 frequency of
your chorce and the VFO frequency
(4) Memory scan and the VFO frequency
1) In the VFO mode. select the frrst dual watch frequency
2) Press the -% MS MS.M key to swrtch to the memory
scan mode
3) Hold down the FUNC key and press the 2 DUAL key
The DUAL rndrcatron appears on the display and mem-
ory scan takes place along with dual watch Operation
with the VFO frequency
(1) Dual watch Operation weil not commence if the memory
address number seiected IS free
(A boo lang medium pitched beep” Sounds )
(2) Dual watch Operation IS paused whrie the memory fre-
quency IS berng recerved
(Dual watch recommences when the Signal IS lost )
(5) Communicating during dual watch Operation
1) To commumcate on the VFO frequency press the # CL
PS key to cancel dual watch Operation
2) To commumcate on the memory frequency, press
the 5 VIM ENT key two times to switch to the memory
mode
42