Inputting frequencies from the 100 MHz
column
m
1)
Swatch
to the extra mode
23 Press the 8
RPT
key.
A[.
]
indication appears on the display and frequency
Input from the 100 MHz column
IS
enabled
How to use charging battery
1) Plug DC adaptor into DC IN plug socket on battery box.
2) Charging time needs
l?-16
hours approximately.
Don7 use other charging Source on charging avoid dam-
aging battery.
3)
To return to the previous
Status.
again
switch
to the
extra mode and press the 7 T
SQ
DM key The
[
.
]
Indication disappears and frequency Input from the
1 MHz column
IS
restored
55
To Next Page
Loading...
