EasyManuals Logo

Intel D34010WYK User Manual

Intel D34010WYK
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #62 background imageLoading...
Page #62 background image
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB
Technical Product Specification
62
3.7.4 Power Button Menu
As an alternative to Back-to-BIOS Mode or normal POST Hotkeys, the user can use the
power button to access a menu. The Power Button Menu is accessible via the following
sequence:
1. System is in S4/S5 (Not G3)
2. User pushes the power button and holds it down
3. The system will emit three short beeps from the PC speaker, then stop to signal the
user to release the power button
4. User releases the power button before the 4-second shutdown override
If this boot path is taken, the BIOS will use default settings, ignoring settings in VPD
where possible.
At the point where Setup Entry/Boot would be in the normal boot path, the BIOS will
display the following prompt and wait for a keystroke:
[ESC] Normal Boot
[F2] Intel Visual BIOS
[F3] Disable Fast Boot
[F4] BIOS Recovery
[F7] Update BIOS
[F9] Remote Assistance
[F10] Enter Boot Menu
[F12] Network Boot
[F2] Enter Setup is displayed instead if Visual BIOS is not supported.
[F3] Disable Fast Boot is only displayed if at least one Fast Boot optimization is
enabled.
[F9] Remote Assistance is only displayed if Remote Assistance is supported.
If an unrecognized key is hit, then the BIOS will beep and wait for another keystroke.
If one of the listed hotkeys is hit, the BIOS will follow the indicated boot path.
Password requirements must still be honored.
If Disable Fast Boot is selected, the BIOS will disable all Fast Boot optimizations and
reset the system.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intel D34010WYK and is the answer not in the manual?

Intel D34010WYK Specifications

General IconGeneral
Maximum Memory16 GB
GraphicsIntel® HD Graphics 4400
Number of Memory Channels2
Max Memory Bandwidth25.6 GB/s
Number of DIMMs2
Serial Port via HeaderYes
Intel® Visual BIOSYes
Consumer Infrared Rx SensorYes
Form FactorUCFF
Processor Support4th Generation Intel Core i3/i5 Processors
Memory TypeDDR3L 1333/1600 1.35V SO-DIMM
Storage InterfaceSATA
NetworkingGigabit Ethernet
AudioIntel® HD Audio
Product CollectionIntel NUC Kit
Supported ProcessorIntel® Core™ i3-4010U Processor (3M Cache, 1.70 GHz)
Graphics OutputHDMI, Mini DisplayPort
Audio OutputHDMI
Expansion Slots1 x Half-length mini PCIe
USB RevisionUSB 3.0
USB Ports4x USB 3.0

Related product manuals