Intel Ethernet X520 10GbE Dual Port KX4 Mezz User Manual

Event
ID
Message Severity
11 E1express:
PROBLEM: Could not allocate memory for receive descriptors.
ACTION: Reduce the number of receive descriptors and restart.
Error
12 E1express:
PROBLEM: Could not allocate memory for receive buffers.
ACTION: Reduce the number of receive descriptors and restart.
Error
13 E1express:
PROBLEM: Could not establish link.
ACTION: Check network cable.
Warning
14 E1express:
PROBLEM: The PCI BIOS has NOT properly configured the PRO/1000 adapter.
ACTION: Get the latest BIOS for your computer.
ACTION: Try another PCI slot.
Error
15 E1express:
PROBLEM: The PCI BIOS has NOT properly configured the PRO/1000 adapter.
ACTION: Get the latest BIOS for your computer.
ACTION: Try another PCI slot.
Error
16 E1express:
PROBLEM: The PCI BIOS has NOT properly configured the PRO/1000 adapter.
ACTION: Get the latest BIOS for your computer.
ACTION: Try another PCI slot.
Error
17 E1express:
PROBLEM: The PCI BIOS has NOT properly configured the PRO/1000 adapter.
ACTION: Get the latest BIOS for your computer.
ACTION: Try another PCI slot.
Error
18 E1express:
PROBLEM: The PRO/1000 adapter was not configured for bus mastering by the PCI BIOS.
ACTION: Install the adapter in a bus mastering-capable slot. See your computer doc-
umentation for details.
ACTION: For more information, run PROSet diagnostics.
Error
19 E1express:
PROBLEM: Could not allocate the NDIS receive packets necessary for operation.
ACTION: Reduce the number of receive descriptors and restart.
Error
20 E1express:
PROBLEM: Could not allocate the NDIS receive buffers necessary for operation.
ACTION: Reduce the number of receive descriptors and restart.
Error
21 E1express:
PROBLEM: The OS was unable to assign PCI resources to the PRO/1000 adapter.
ACTION: Move the adapter to another slot.
ACTION: Remove other hardware that may be causing a conflict.
Error
22 E1express:
PROBLEM: The driver was unable to claim PCI resources of this PRO/1000 adapter.
ACTION: Remove any unused driver instances from the network control panel applet.
NOTE: Uninstalling any unused network drivers via the control panel may eliminate
this error.
Error
23 E1express:
PROBLEM: The EEPROM on your PRO/1000 adapter may have errors.
ACTION: Visit the support web site at http://support.intel.com/support/network/ for support.
Error

Intel Ethernet X520 10GbE Dual Port KX4 Mezz Specifications

General

Interface	KX4
Data Rate	10 Gbps
Form Factor	Mezzanine
Data Transfer Rate	10 Gbps
Product Type	Network Adapter
Controller	Intel 82599
PCIe Version	2.0
Virtualization	Yes
Operating Temperature	0°C to 55°C
Jumbo Frames	Supported
Ports	Dual Port