Intel Ethernet X520 10GbE Dual Port KX4 Mezz User Manual

Command line install examples
This section describes some examples used in command line installs.
Assume that setup.exe is in the root directory of the CD, D:\. You can modify the paths for different operating systems
and CD layouts and apply the command line examples.
1. How to install the base driver on Windows Server 2008:
D:\Setup DMIX=0 ANS=0 SNMP=0
2. How to install the base driver on Windows Server 2008 using the LOG option:
D:\Setup LOG=C:\installBD.log DMIX=0 ANS=0 SNMP=0
3. How to install Intel PROSet and ANS silently on Windows Server 2008:
D:\Setup DMIX=1 ANS=1 /qn
4. How to install Intel PROSet without ANS silently on Windows Server 2008:
D:\Setup DMIX=1 ANS=0 /qn
5. How to install components but deselect ANS for Windows Server 2008:
D:\Setup DMIX=1 ANS=0 /qn /liew C:\install.log
The /liew log option provides a log file for the DMIX installation.
NOTE: To install teaming and VLAN support on a system that has adapter base drivers and Intel PROSet for Win-
dows Device Manager installed, type the command line D:\Setup ANS=1.
Windows Server 2008 Server Core
In Windows Server 2008 Server Core, the base driver can be installed using the Plug and Play Utility, PnPUtil.exe. For
more information on this utility, see http://technet2.microsoft.com/windowsserver2008/en/library/c265eb4d-f579-42ca-
b82a-02130d33db531033.mspx?mfr=true.

Intel Ethernet X520 10GbE Dual Port KX4 Mezz Specifications

General

Interface	KX4
Data Rate	10 Gbps
Form Factor	Mezzanine
Data Transfer Rate	10 Gbps
Product Type	Network Adapter
Controller	Intel 82599
PCIe Version	2.0
Virtualization	Yes
Operating Temperature	0°C to 55°C
Jumbo Frames	Supported
Ports	Dual Port