Intel Ethernet X520 10GbE Dual Port KX4 Mezz User Manual

The Laser device must be factory serviced ONLY by the responsible manufacturer! NO adjustments, service or main-
tenance is to be performed otherwise.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
These Class 1 Laser devices:
Comply with FDA/CDRH per CFR21, subchapter J.
Comply with EN60825-1:1994+A1+A2
End-of-Life/Product Recycling
Product recycling and end-of-life take-back systems and requirements vary by country. Contact the retailer or distributor
of this product for information about product recycling and/or take-back.
Regulatory Class B
Regulatory Compliance Statements for Class B Products
Copper Products
l
Intel® 10 Gigabit AF DA Dual Port Server Adapter, Model E27466
l
Intel® Ethernet 10G 2P X520 Adapter, Model G28429
Fiber Products
l
Intel® Ethernet Server Adapter X520-2, Model E69818
l
Intel® 10 Gigabit XF SR Server Adapter, Model E15729
Safety Compliance
l
UL 60950-1 Second Edition
l
CAN/CSA-C22.2 No 60950-1-07 Second Edition
l
EN 60950-1:2006 +A11:2009 Second Edition (European Union)
l
IEC 60950-1:2005 Second Edition (International)
l
EU Low Voltage Directive 2006/95/EC

Intel Ethernet X520 10GbE Dual Port KX4 Mezz Specifications

General

Interface	KX4
Data Rate	10 Gbps
Form Factor	Mezzanine
Data Transfer Rate	10 Gbps
Product Type	Network Adapter
Controller	Intel 82599
PCIe Version	2.0
Virtualization	Yes
Operating Temperature	0°C to 55°C
Jumbo Frames	Supported
Ports	Dual Port