Intel® Optane™ Memory
May 2019 Installation Guide
571964-005US 61
5. From the Windows 10 USB Install key, copy the “install.wim” file from the “sources” directory to the
working directory C:\Win10USB
6. Open a Command Prompt as Administrator, and change to the working directory (Ex. cd C:\Win10USB).
Make sure that all folders and Windows Explorer are closed before starting this process.
7. Based on the Windows 10 version, determine which index number to modify. Choose the index that
matches the Windows 10 version being used.
To determine the index, run the command: dism /get-wiminfo /wimfile:install.wim
Example below modifies Index 2. Steps can be repeated to modify additional versions
8. Modify the ”install.wim” file by running the following commands:
Mount the Windows* Image:
dism /mount-image /imagefile:install.wim /index:2 /mountdir:windows
To Next Page
Loading...
