Intel R1000WF Series - Table 18. Intel Server Chassis R2312 WFXXX Product Specifications and Configuration Requirements

Intel® Server S2600WF Product Family Configuration Guide
49
Table 17. Intel® Server Chassis R2312WFXXX product specifications and configuration requirements
Intel® Server Chassis R2312WFXXX
2U, 2 x 3.5” HDD or 12 x 2.5” SSD SATA/SAS front mount drives (support for up to 2 NVMe* drives)
iPC
R2312WFXXX
MM#
952624
UPC
00735858390309
EAN
5032037138567
MOQ
1
Product type
Chassis only
Chassis form factor
2U rack mount
Packaged gross wt.
19 kg (41.9 lb)
Un-packaged net wt.
13.3 kg (29.3 lb)
Chassis dimensions
712 x 439 x 89 mm (L x W x H)
Package dimensions
983 x 577 x 260 mm (L x W x H)
Included
Required Items (sold separately)
Optional Accessories (sold separately)
(1) – 2U Chassis with Quick Reference Label affixed to top cover
(12) – 3.5” hot-swap drive bays with drive carriers and blanks. Includes:
o (1) SAS/NVMe* combo backplane – iPC F2U12X35S3PH
o (12) 3.5” hot swap drive tool less carriers – iPC FXX35HSCAR2
(1) – Storage Rack Handle Assembly – iPC A2UHANDLKIT
o 1 set Storage Rack Handles
o Mini-front panel (board only – iPN G28538-xxx)
o 410 mm front panel cable – iPN H26893-xxx
o 640 mm front panel USB 2.0 cable iPN H20005-xxx
(1) – 175 mm Backplane I2C Cable – iPN H91172-xxx
(1) – 800 mm Mini SAS HD Cable iPC AXXCBL800HDHD
(1) – 875 mm Mini SAS HD Cable iPC AXXCBL875HDHD
(1) – 525/675 mm Backplane power cable – iPN H82097-xxx
(1) – Standard 2U air duct – iPN H90554-xxx
(6) – Hot swap system fans – iPC FR2UFAN60HSW
(16) – DIMM slot blanks – iPN G75158-00x
(1) – Power supply bay blank insert
(2) – AC Power Cord retention strap assembly – iPN H23961-00x
(2) – CPU heat sinks – iPC FXXCA78X108HS
(2) – CPU heat sink “NO CPU” mylar spacer insert – iPN J16115-XXX
(2) – Standard CPU carrier – iPN H72851-xxx
(1) – 3x Intel® RAID Maintenance Free Backup unit mounting bracket –
iPN H18238-00x
(1) – 175 mm I2C cable – iPN H91172-xxx
(1) – Internal fixed mount 250 mm SSD drive power cable –
iPN J29245-xxx
(2) – Riser Card mounting brackets supporting up to 3 riser cards (riser
cards sold separately – see Section 5.2)
(1) – Power supply bay blank insert
Server Board and Riser Card mounting screws
Spares for each screw type included
• Intel® Server Board S2600WF (choose one)
o iPC S2600WFT(R)
o iPC S2600WF0(R)
o iPC S2600WFQ(R)
• Power supply module(s) (choose one type)
– (2) common modules required for
redundancy
o 1300W AC power supply module –
iPC AXX1300TCRPS
o 1100W AC power supply module -
iPC AXX1100PCRPS
o 750 W DC power supply module -
iPC AXX750DCCRPS
• Power cord(s) – See Section 5.6
• Rack mount kit – See Section 5.7
• (1) or (2) 1
st
or 2
nd
Gen Intel® Xeon®
processor Scalable family – see Section
1.1.1 for details on processor support
• ECC DDR4 memory (RDIMM or LRDIMM)
Rear storage bay option
• Up to (2) hot swap SATA SSDs – iPC A2UREARHSDK2
Riser Cards – Up to (3) can be installed concurrently
• Risers Slots #1 and #2 – Available riser cards include:
o 3-slot riser card, (3) x8 PCIe* 3.0 slots –
iPC A2UL8RISER2
o 2-slot riser card, (1) x16 PCIe* slot and (1) x8 PCIe*
slot – iPC A2UL16RISER2
• Riser Slot #3 – Available riser cards include:
o 2-slot riser card, (1) low profile x8 PCIe* 3.0 slot
and (1) low profile x8 PCIe* 2.0 slot –
iPC A2UX8X4RISER
Other
• SAS/SATA/NVMe data cables – Cable selection is
dependent on desired storage option. See Chapter 4
for available cable options
• Intel® RAID Card/Module – See Section 5.5 for options
• SAS Expander Options – See Sections 4.6.2 and 4.7.4
• Intel® Ethernet Network Adapter for OCP* - See
Chapter 5.4 for available options
• Intel® Remote Management Module 4 Lite RoHS free
key for advanced management features –
iPC AXXRMM4LITE2
• DDDC DDR-compatible Intel® Optane™ DC persistent
memory module (supported by Intel® Server Boards
S2600WFTR, S2600WF0R, and S2600WFQR with a
2
nd
Gen Intel® Xeon® Scalable processor)
See Chapters 5 and 6 for all available accessory options.