EasyManua.ls Logo

Intelbras AMT 4010 Smart - Device and System Behavior Settings

Intelbras AMT 4010 Smart
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
Enter + 3902 + XX + Enter, where XX goes from 01 to 64
3902 Zone 01 to 64
Key 1
Timed Zone
Key 2
Follower Zone
Key 3
24h Zone
Key 4
Panic Zone
Key 5
Medical Emergency Zone
Key
6
Fire Zone
Key
7
Electric fence trigger (only available as of version 2.0)
Key
8
Doorbell ringing (available only as of version 2.0)
Note: each zone can have permission on only one attribute. If you check the permis-
sion on more than one attribute, the rst one checked is the one that counts.
3.8. Power-on input (as of version 2.00)
Power-On input zone:
Enter + 09 + Zone (2 digits) + Enter
Power-On input partition:
Enter + 516 + Enter
Key
5
Partition A
Key
6
Partition B
Key
7
Partition C
Key
8
Partition D
Permission to activate and/or deactivate the power-on input:
Enter + 518 + Enter
Key
2
Permission to activate
Key
3
Permission to deactivate
3.9. Open XEZs zones after bus failure (as of version 3.80)
To enable:
Enter + 518 + enter
Key
4
Opens the zones on failure
Note: as of version 5.0 the Open Zones on Failure function will leave enabled from
the factory.

Related product manuals