Intelbras AMT 4010 Smart - Configuration of Call Answering for Download;Upload

33
4 = regular IP
5 = split IP
6 = double IP
7 = double mix
8 = DX-Net/Radioenge radio
B = telephone protocol 1
C = telephone protocol 2
Note: the Split Telephone, Split IP and Double Mix functions have been removed as
of version 5.0.
The following numbers apply to B and C parameters
0 = Contact-id
1 = Programmable Contact-id
2 = Adenco Express
Note: the Adenco Express and Programmable Contact-ID functions have been re-
moved as of version 5.0.
3.30. Conguration of call answering for download/upload
Enter + 12 + ?? + Enter
?? = number of rings from 00 to 20
Commands for telephone programming
Enter + 10 + ? + (tel. with up to 20 digits) + Enter
? = memory from 1 to 8
Deleting a telephone number
Enter + 10 + ? + Cancel + Enter
? = memory from 1 to 8
Programmed telephone test
Enter + 11 + ? + Enter
? = memory from 1 to 8
Interrupt programmed telephone test
Enter + 11 + Enter