Intelbras AMT 4010 Smart - General, Monitoring, and Communication Setup

30
?? = user, zone or bus device:
?? = 00 center’s name
?? = from 00 to 61 users
?? = from 01 to 64 zones
?? = from 01 to 18 bus devices
?? = from 01 to 16 wireless panic users
?? = from 01 to 16 wireless re users
?? = from 01 (line 1) to 02 (line 2) editable message
3.27. Keyboard Messages Reset
Note: From version 3.30 onward of the AMT 4010 SMART and AMT 4010 SMART
NET, it will not be possible to reset the center’s messages.
Enter + ? + Cancel + Enter
? = Message Group:
? = 2 users
? = 3 zones
? = 4 bus devices
? = 5 wireless panic user
? = 6 wireless re user
3.28. General Conguration
Enter + 51 + ? + Enter + select function + Enter
? = function group 0 to 5
Obs.: the Call back and Secretary Override functions have been removed as of ver-
sion 5.0.
Key
Function group
= 0
Function
group = 1
Function
group s = 2
Function
group = 3
Function
group = 4
Function
group = 5
1 Partitioning
Silent Panic
by key 0
Reset block
Sirene cut
sensor
Call back
Auxiliary
output
overload
2
One key
activation
Audible Panic
by key 2
Remote
control block
Siren short-
circuit sensor
Secretary
override
Bus device
problem