EasyManua.ls Logo

Intelbras AMT 4010 Smart - System Resets and Updates

Intelbras AMT 4010 Smart
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
39
Select SMS events
Note:
The Select SMS Events Function has been removed as of version 5.0.
Enter + 833 + Enter
Key
1
SMS on activation
Key
2
SMS on activation
Key
3
SMS for triggers (will send only the rst trigger that occurs))
Key
4
SMS activation/deactivation by the duress password
Telephone for SMS
Note:
the Phone for SMS function has been removed as of version 5.0.
Enter + 84 + ? + Enter + 20-digit phone number + Enter
? = memory 1 to 5
Deleting a telephone number for SMS
Enter + 84 + ? + Cancel + Enter
Memory N° from 1 to 5
Note: the function
Delete a Telephone Number for SMS
has been removed as of
version 5.0.
3.33. Functions via SMS
SMS messaging
Note:
the SMS Messaging function has been removed as of version 5.0.
It is not necessary to congure GPRS (login, APN or password) of the chip for the
SMS
function to work.
3.34. Temporary master and installer password reset
1. Disconnect the center from the AC mains and the battery;
2. Short-circuit the terminals where the siren is connected;
3. Connect the center to the AC mains;
4. For 30 seconds the master password will reset to
1234
and the installer password
will reset to
9090
.

Related product manuals