Intelbras AMT 4010 Smart - Page 38

38
DNS servers for GPRS
Enter + 828 + ? + Enter + edit the server + Enter
? = 1 - server 1
2 - server 2
Note: helps with connection stability.
GPRS connection attempt interval
Enter + 829 + ?? + Enter
?? = time from 00 to 20 minutes
Note: factory default: 5 minutes .
Note: the GPRS connection attempt interval function has been set to 0 and cannot
be changed as of version 5.0.
GPRS connection response timeout
Enter + 820 + ??? + Enter
??? = time from 060 to 120 seconds
Note: factory default: 090 (90 seconds).
GPRS/AMT mobile channel options
Enter + 832 + Enter + select the keys + Enter
Key 1 Chip 1
Key 2 Chip 2
Key 3 SMS Sending
Key 4 SMS Reception
Key 5 Enables AMT Mobile
Note: » The center does not make phone calls via chip, it uses this channel only for
sending SMS and GPRS connection.
» The center does not send silent panic SMS.
» As of version 3.00 AMT 4010 SMART and AMT 4010 SMART NET it will not be
possible to disable AMT Mobile.
» The SMS sending and SMS receiving functions have been removed as of ver-
sion 5.0.