5.3. Description of the LEDs signaling on the alarm center boards ............31
LEDs of alarm center baseplate 31
LEDs of XAG 8000 GPRS board 31
5.4. Partitioning .................................................32
5.5. Activation/deactivation of the alarm center ..........................33
Activating/Deactivating on non-partitioned systems 34
Activating/Deactivating on Partitioned Systems 35
5.6. Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Bypass 37
Open Sensors 37
Trigger Sensors 38
Partitions 38
Connections 38
GPRS signal 39
Wireless signal 39
Addr. MAC 41
Center version 41
Keyboard version 41
Test mode 41
Battery tens. 41
5.7. Remote update ..............................................41
6. Programming 42
6.1. Programming mode ..........................................42
Using the XAT 8000 Wireless Keyboard 42
Using AMT Remote Mobile Application (for mobile devices) 45
Using the AMT 8000 programmer (for computers) 46
Using Intelbras Guardian application (for mobile devices) 46
6.2. Wireless devices (register/delete) .................................46
Wireless device registration by means of the alarm center synchronization
button 47
Registering by keyboard command 49
Reset wireless devices 54
To Next Page
Loading...
