Name: Intellian t100W
Brand: Intellian
Rating: 4 (1 reviews)

To Next Page

To Previous Page

INSTALLING THE ACU

PC to ACU Communication Setup

You can establish data communication between a PC and the ACU using one

of the following methods.

TCP/IP Connection

Connection through Front Panel Management Port

This method is highly recommended. The network is automatically congured by

DHCP without the need of additional PC IP conguration.

1. Connect an Ethernet cable from a PC Ethernet port to the Management port

on the front of the ACU.

2. Network connection is established.

3. Use the following IP address to access Intellian Aptus

or Aptus Web page.

• 192.168.2.1 (Default)

Connection through Rear Panel Ethernet Port

This method requires separate IP conguration on a PC.

1. Connect an Ethernet cable from a PC Ethernet port to an available LAN port

of a Switch/Hub.

2. Go to Control Panel > Network and Sharing Center > Change Adapter Settings

and right-click on the Local Area Connection then click Properties

3. Select TCP/IPv4, then click Properties.

4. Change the network settings on a PC;

• IP: 192.168. 0.222 (Secondary: 10.10.1.2)

• Subnet Mask: 255.255.255.0

• Gateway: 192.168.0.223 (Secondary: 10.10.1.1)

5. Use the following IP address to access Intellian Aptus

or Aptus Web page.

• Default: 192.168.0.223 (Secondary: 10.10.1.1)

Management

Ethernet Port

Intellian t100W User Manual

Questions and Answers: