English
6
I Weekly
II Two-weekly
From or to
Current setting (menu)
Daylight saving time activated
>> Speed monitoring
Register company on digital tachograph
Deregister company from digital tachograph
--- No card
Card valid to
Driver card
Company card
Control card
Workshop card
OUTStart of digital tachograph not required
OUT End of digital tachograph not required
Further combinations of symbols can be found at the end of this manual.
4 Menu Structure
The following figure shows the EFAS menu structure.
Which of the menu items can be accessed depends on the mode of the tachograph, which is set when
certain tachograph cards are inserted.
The remarks in the following representation denote:
*1) Only available with inserted workshop card (mode CALIBRATION)
*2) Only available for the currently registered company
*3) Optionally available (depends on the device settings)
*4) Only available in the modes COMPANY or CALIBRATION
*5) Only with driver or workshop card inserted
*6) Only available, if the remote download device is connected
*7) Only in the mode COMPANY and only if the inserted company card belongs to the company which
activated the last company lock
*8) Only available with inserted company or workshop or control card
*9) Only available with inserted workshop card
To Next Page
Loading...
