Intercall 600 - Alphanumeric Paging

Intercall 600/700 Installation & Operation Guide Issue 4.27 Page 39 of 78
Alphanumeric Paging Kit.
The Alphanumeric Paging Kit is used in conjunction with the L747 Universal System Interface to provide
alphanumeric paging for both the Intercall 600 and 700 systems. The kit is comprises; Paging transmitter with integral
240V ac supply and back up battery, power lead, RS232 data connection lead, ¼ wave antenna and one alphanumeric
pager. Please read and retain all relevant documentation supplied with the transmitter and pager. You attention is
drawn to the licensing requirements of this type of equipment and the package should contain all application forms.
The standard scope transmitted supplied by us is fitted with a RS232 data
interface and a RS232 data lead for direct connection to the L747 Interface.
How the pagers will display the calls:
Intercall 600
Pagers are supplied with full operating instructions and modes of operation. Additional pagers are available part
number RAP. However it is important to record the serial number of the transmitter, as this number will need to be
quoted when additional pagers are ordered for existing systems.
By using the Intercall 700 PC based call management software, it is possible to route the calls from individual callers to
specific members of staff. The PC interface to the Intercall system is via the L747.
Using the LIMKIT it is possible to program the standard L747 pager CAP code (Pager Address) sent to the pager
transmitter.
Intercall 600
9
Intercall 700
9
BEDROOM 323
CALL
Intercall 600 Standard Call
BEDROOM 323
EMERGENCY
Intercall 600 Emergency
BEDROOM 323
RESET
Intercall 600 Reset Call
BEDROOM 323
CALL
MARY JONES
Intercall 700 Standard Call
with user ID
BEDROOM 323
CALL
NO USER ID
Intercall 700 call with no
user ID
BEDROOM 323
ATTACK
USER No 54
Intercall 700 Attack call
with user ID
L717/
L617
240VAC Power
Supply
Serial RS232
Data Lead
(747SL)
Scope
Transmitter
L747 Interface