Intercall 600 - SRP Slave Reset; Present Point

Intercall 600/700 Installation & Operation Guide Issue 4.27 Page 54 of 78
SRP Slave Reset / Present Point.
Slave Reset / Present Points are normally located by the door of a bedroom to enable staff to reset the call point and to
register as staff present away from the patient call point. The unit is used in conjunction with the L732 Call Point,
which has additional terminals for this purpose.
Reset Button: Performs same functions as reset button on L732 but in remote location.
LED: Green Led operates with green re-assurance LED in L732 Call Point
Installation: Flush or surface mount in standard ‘single size’ electrical backbox.
Size & Weights: 80 x 80 x 40 mm, 60g
Intercall 600
9
Intercall 700
9
Above: Front panel and pcb detail of the SRP Slave Reset/Present Point
Above: T
yp
ical Room La
y
out showin
g
L732 Call Point
,
SRP Remote/Preset Unit and L746 Overdoor Li
g
ht.
Above: SRP Connects to L722 (Mk2) Call point using X2 and L2 terminals