Intercall 600/700 Installation & Operation Guide Issue 4.27 Page 52 of 78
LIMKIT System Configuration Kit.
The LIMKIT contains all required components to configure the system including interface, leads and software. The
Programming Module is used to program the software configurable devices such as the TIR4 Mk2 pendant trigger and
the ST range of triggers together with the Room Text and User ID text within the power supply units. The unit is
supplied with connection leads which are required to program different devices. The module is an interface between a
Personal Computers’ RS232 port and the programmed device or power supply. It is supplied with the following leads:
• Combined power supply and serial lead for connection to PC RS232 port with Plug Top style power supply.
• Trigger and auxiliary device programming lead
• Power Supply connection Lead.
• Limprog XP CDROM programming software.
LIMPROG XP Configuration software Microsoft Windows 2000/XP.
The LIMPROG Configuration Software is used in conjunction with the LIM Programming Module to program the text
within the system. See page 57 for more information. The software is supplied on CD ROM, to install the software, run
the setup.exe installation program which has on-screen help & instructions. All the text used by the system is stored in
the power supply and can be downloaded to the system by either the software or by using the download button on the
power supply. (See page 29) Once downloaded, the information is also stored in the displays, printer interface and
alphanumeric pager interface.
Intercall 600
9
Intercall 700
9
To Next Page
Loading...