TL6000, Users
Rev L, June 2008
Page 21 of 22
Scoreboard
The scoreboard output is an externally available signal designed to drive a numeric
overhead display board or a computer's RS-232 input.
Transmitted data: xxxxxxx lb
↑ (or current unit)
The net weight field is seven characters long and could contain preceding spaces a
decimal point and/or a minus sign.
The connection to a 9-pin PC communication port is:
Signal PC 9-pin
TXD2 (4) 2
GND (6) 5
NOTE: For some setups it may be necessary to jump pins [6, 1, and 4] together, and
pins [7 and 8] together on the PC port connector.
The connection to a 25-pin PC communication port is:
Signal PC 25-pin
TXD2 (4) 3
GND (6) 7
NOTE: For some setups it may be necessary to jump pins [6, 8, and 20] together, and
pins [4 and 5] together on the PC port connector
To Next Page
Loading...
