To Next Page

To Previous Page

Using the System

System Sounds

The AdvisorOne system uses sounds to communicate system activity, such as alarm

and trouble conditions.

• When an intruder is detected or an emergency alarm is activated or carbon

monoxide or smoke issue is detected, a loud alarm is emitted from the AdvisorOne

panel’s internal siren (Figure 15) and also from optional Advisor TouchScreens and

optional external sirens. For more information, see Alarms.

• The AdvisorOne panel uses status beeps to signal various system events and

conditions. These can include a change in monitored property or a trouble condition,

such as a low battery or power failure.

• The AdvisorOne panel can speak to announce changes in system status or an alarm

condition. Also, if voice chime is enabled, the system speaks the name of a door that

is opened when the system is disarmed.

• The chime feature is used to signal when a monitored door is opened while the

system is disarmed.

• If enabled, the system initiates a two-way voice conversation when the Emergency

Alarm button is pressed. The central station will call the panel and attempt to speak

to the occupant who initiated the alarm. To respond to the central station, speak into

the microphone on the AdvisorOne panel.

Interlogix advisorone User Manual

Other manuals for Interlogix advisorone