To Next Page

To Previous Page

• Entry Delay – Turn Off this option to disable the entry delay time for this arming

cycle. The system creates an alarm the instant the entry door is opened.

• Silent Exit – Turn On this option to silence the beeps that normally sound during

the ARM countdown. Silent Exit doubles the exit delay timer.

4. Choose an arming level (Figure 19).

• Press ARM STAY if someone is remaining inside the premises.

• Press ARM AWAY if everyone is leaving the premises.

• Press ARM NIGHT to disable specific zones set by the installer. This is a less-

frequently-used configuration. Contact the provider for more information.

Figure 19: Arm System screen

Note: This configuration may look different from the example shown above.

5. If the system is configured with multiple partitions, select which partitions to arm by

pressing the check mark button next to the partition. Press CONTINUE.

• A blue check indicates a selected partition.

• A gray check indicates a partition not selected.

Note: If no trouble conditions exist, proceed to step 6.

Interlogix advisorone User Manual

Other manuals for Interlogix advisorone