To Next Page

To Previous Page

Thermostat Application

The Thermostat Application enables a user to view and control the Z-Wave thermostats.

Contact the service provider for more information.

Follow these steps to use the Thermostat application:

1. Press the THERMOSTAT icon on the Applications screen.

Note: On the Thermostats screen, note that the center of the screen shows the

current room temperature (Figure 63). The text above the MODE button shows the

present thermostat mode. To change from Fahrenheit to Celsius and vice versa,

press and hold the period between the large digits.

2. Press the MODE button.

Figure 63: Thermostat

3. Select either Heat, Cool or Off to set the thermostat mode. The selection will be

displayed above the MODE button.

Note: A dropdown icon will be present (Figure 64) if there is more than one

thermostat added in the system. An arrow icon will appear next to the thermostat

name. Press the icon to bring up the list of configured thermostats. Select any of the

available thermostats to control and monitor the desired thermostat.

Interlogix advisorone User Manual

Other manuals for Interlogix advisorone