Interlogix NX-595E - System Control Operations

20 NX-595E Installation Manual
calling back the NX-595E, which will now answer the next incoming call. The
second call must be made within 60 seconds of the first call.
An installer code is unrestricted and can access all partitions of the NX-595E,
including menu 0.0 “Panel and device configuration”.
Main Menu – Structure
1 System Status
2 System Control
2.1 System Status
2.2 Partition Control
2.3 Zone Bypass
2.4 Event History
2.4.1 Alarm Memory
2.4.2 Event History
3 Intercom Control
3.1 Listen In
3.2 Two way communication
4 Output Control
5 Message Bank
5.1 Record an Exit Message
5.2 Record an Entry Message
0 System
Configuration
0.1 User Configuration
0.1.1 User Pin
0.1.2 User Partition
0.1.3 User Authority
0.2 Time and Date
0.2.1 Time
0.2.2 Date
0.3 Partition Entry Time
0.4 Partition Exit Time
0.5 Phone number configuration
0.5.1 Alarm Phone Number One
0.5.2 Alarm Phone Number Two
0.5.3 Alarm Phone Number Three
0.5.4 Divert Phone Number One
0.5.5 Divert Phone Number Two
0.5.6 Divert Phone Number Three

0.5.0
Service provider phone
number
Installer access only
0.6 Voice Message
0.6.1 Exit message
0.6.2 Entry message
0.6.3 User name
0.6.4 Zone name
0.6.5 Partition name
0.6.6 Output name
0.6.7 Room name