Interlogix NX-595E Installation Manual

6 NX-595E Installation Manual
The equipment should only be operated with an approved power adapter with
insulated live pins.
Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of
batteries according to the instructions. Contact your service provider for
replacement batteries.
Disclaimer
A level of TCP IP knowledge is required by the installer/s to set up some of the
NX-595E functionality. UTCSF limits it support to NX-595E setup only, and is
unable to offer further assistance on your client's DSL modem, router, firewall or
any other 3
rd
party software. Please consult your customers IT department or
qualified IT professional about implementing this product onto your client's
network.
Warranty
UTC Fire & Security Americas Corporation, Inc. guarantees this product against
defective parts and workmanship for twenty-four (24) months from the date of
purchase. If any defect appears during the warranty period contact your service
provider. UTC Fire & Security Americas Corporation, Inc. assumes no liability for
consequential or indirect damage, and accepts no responsibility for repairing
damage to the product caused by misuse, careless handling, or where repairs
have been made by others.
No other guarantee, written or verbal, is authorized by UTC Fire & Security
Americas Corporation, Inc.

Interlogix NX-595E Specifications

General

Quantity	1
Compatibility	V2 (NX-4, NX-6, NX-8, NX-8E, NX-7, NX-9, NX-10, NX-11)
Operating temperature (T-T)	0 - 49 °C

Weight and Dimensions

Depth	90 mm
Width	220 mm
Height	45 mm
Weight	130 g
Dimensions (WxDxH)	220 x 90 x 45 mm