Appendix A — Specifications and Default Settings
90 CV61 Vehicle Mount Computer (Windows 7) User Guide
Scanner Settings
Scanner Port Settings
Scanner Settings Default Value
Scanner Model SR Intermec Scanner
Trigger Mode Level
Aimer Mode Typical aimer
Hardware Trigger Enable
Trigger Timeout (sec) 2
Aiming Duration (msec) 500
Turn Off After Good Read Enable/One-shot
Number of Good Read Beeps One
Scanner Port Settings Default Value
Baud Rate 57600
Imager Settings
Scanner Port Settings Default Value
Predefined Modes 1D and 2D standard
Sticky Aimer LED Duration 0
Imager Decode Mode 2D imager
Ligthing Mode Illumination LED priority
Lighting Goal 40
Top Position 0
Bottom Position 479
Aimer LEDDuration 0
Aimer Flashing Flashing
Illumination Mode Always on
Illumination Level Brightest
Initial 1D Search Area Center
Horizontal Focus Factor Disabled
Horizontal Focus Threshold 30
Vertical Focus Factor Disabled
To Next Page
Loading...
