Chapter 1 — About the Vehicle Mount Computer
CV61 Vehicle Mount Computer (Windows 7) User Guide 9
Use the following table to learn about the indicator default status. For
further customization, you can enable or disable the Ready-to-Work
indicator in Intermec Settings. For more information, see “Start
Intermec Settings” on page 33.
Adjusting the Volume
You can change the CV61 volume, for sounds you hear when you tap
the screen or scan bar codes with a scanner.
1 Tap the speaker icon in the taskbar.
2 Move the speaker slider up or down, or tap the speaker icon in the
slider to turn the volume on or off.
Ready-to-Work Indicator Status
LED Description
On The CV61 is powered on.
Blinking The indicator blinks when:
• the CV61 is in state maintenance mode.
• DC power is disconnected.
• attempting to boot at -20 °C (-4 °F) or below.
Off The CV61 is off.
To Next Page
Loading...
