Chapter 3 — Manage the Computer
26 CV61 Vehicle Mount Computer (Windows 7) User Guide
2 Double-click the application file to install it. The application file
should appear in the Software Vault.
3 From the SmartSystems console in the Software Vault,
drag-and-drop the application onto each computer in your
network, or drop the application on a group of computers
contained in a folder.
Install Applications Using a USB Storage Device
You can use a USB storage device to install applications onto your
computer one at a time or if you have no network connection. To
connect a USB storage device to the CV61, you need to purchase a
CV61 USB cable. For more information, contact your local Intermec
representative.
1 Copy your application file to the USB storage device.
2 Connect the CV61 USB cable and the USB storage device into the
computer.
3 Click Open folder to view files when the pop-up screen appears.
4 Click the executable file to install the application to the computer.
Install Applications Using an SD Card
Use an SD card to install applications on one computer at a time or if
you have no network connection.
1 Copy your application file to the storage card.
2 Install the SD card in the CV61.
3 On the CV61, browse to the SD Card folder and run your
application.
Install Applications By Mapping To a Network Drive
Map to a network drive so that you can transfer files to your computer.
Note: You may need to contact your IT department to map to certain
drives.
To Next Page
Loading...
