Chapter 2 — Configuring the CK31
54 CK31 Handheld Computer User’s Manual
If your preferred printer does not appear, make sure the
printer is powered on and discovery is enabled, and then
repeat Steps 1 through 3.
Note: Bluetooth devices that are not printers may be
displayed on this screen even though the Show Printers
Only check box is checked.
4 Tap Test Print. The printer prints a short message, verifying
that the printer has been selected as the current wireless
printer.
To manually enter the device address of the printer
1 Select Start > Settings > Control Panel and double-tap the
Wireless Printing icon. The Wireless Printing dialog box
appears.
2 Select Manual and tap Acquire Printer. The Manual Set
dialog box appears.
To Next Page
Loading...
