Chapter 5 — Network Support
CN3 Mobile Computer User’s Manual 137
Knowing the Version Numbers of Your Phone Features
Scroll to, then tap the Version Information tab to view the latest versions
of all of your phone features. Move the scroll bar along the bottom to the
right to see additional information.
Using the GSM/EDGE Radio Phone Application
With the WAN radio module installed in your CN3, you can send and
receive telephone calls as well as transmit data via wide-area cellular
networks. The CN3 provides a phone speaker, microphone, and
speakerphone, and supports the use of a Bluetooth headset or hands-free
kit. At factory-default, the phone is disabled. To turn on the phone, use
either of the following methods:
Using the Wireless Manager to Turn on the Phone
You can use the Wireless Manager to enable and disable Bluetooth, Wi-Fi,
and the Phone if it is built into your CN3.
Note: The Wireless Manager application is available only when Microsoft
Zero Configuration is enabled. If Intermec Security is enabled, then this
application is not available. See page 178 for information on enabling and
configuring Microsoft Security.
To Next Page
Loading...
