Chapter 5 — Network Support
180 CN3 Mobile Computer User’s Manual
Configuring Preferred Networks
Networks already configured are preferred networks. You can connect to
only preferred networks or search for and connect to any available network.
A wireless network can be added either when the network is detected, or
manually by entering settings information. To determine if authentication
information is needed, see your network administrator.
To add a wireless network
2 Enter a Network name. If the network was detected, the network name
is entered and cannot change.
3 From Connects to, select to what your network is to connect. If you
select “Work,” you can do a VPN connection or use proxy servers. If you
select “The Internet,” you can connect directly to the internet.
4 Select This is a device-to-device (ad-hoc) connection to connect to an
ad-hoc connection.
1 Tap Start > Settings > the Connections tab > the Wi-Fi icon , then tap
Add New . . .
To Next Page
Loading...
