Chapter 1 — Using the Computer
10 CN3 Mobile Computer User’s Manual
3 Align the battery contacts and insert the new battery in the battery
compartment. Press down on the battery until it clicks into place.
Checking the Battery Status
The Battery Status LED above your CN3 display, as shown in the following
illustration, indicates the status of your battery. See the following table to
understand the meanings of the lights emitted from the LED.
Understanding the Battery Status LED
You can check battery status by using the Power applet.
To check the battery status
Batttery Status Description
Steady Green Battery is more than 95% charged and CN3 is on a charger.
Blinking Red Battery is low. CN3 goes into suspend mode.
Steady Red Battery is on charge.
Steady Amber Either the CN3 is in a dock but is missing its battery; or the
temperature of the battery pack is too hot or too cold for it to charge.
•Tap Start > Settings > the System tab > the Power icon, then tap the
Battery tab.
To Next Page
Loading...
