Intermec CN3 - Activating the Phone

Chapter 5 — Network Support
138 CN3 Mobile Computer User’s Manual
To turn on the phone using the Wireless Manager
2 In the Wireless Manager, either tap All or tap Phone, then wait for “On”
to appear beneath the Phone row.
3 Once activated, the name of your phone network appears in the Today
screen like the following:
4 Tap Menu > Phone Settings to configure the phone (more information
to follow).
5 Tap Done to close the Wireless Manager.
Activating the Phone
The GSM/EDGE phone is activated via a SIM card that you can purchase
from your network provider, and inserted in the miniSD/SIM cavity in the
back of your CN3. Contact your Intermec representative for more
information.
To insert the SIM card
1 Press the Power button to suspend the CN3, then remove the battery
pack from the back of the CN3.
2 Remove the two screws on the miniSD/SIM card slot door. Note the
screws to this door are to be torqued to 1.5 in-lbs.
3 Gently lift the door to the card slot, then with the metal contacts facing
down, insert the SIM card into its card slot in the door.
4 Press the miniSD/SIM card slot door down, insert the two screws,
reinsert the battery pack, then press the Power button.
1 Tap Start > Settings > the Connections tab > the Wireless Manager
icon, or tap the Wireless Manager row from the Today desktop.