Chapter 1 — Using the Computer
28 CN3 Mobile Computer User’s Manual
To enable extended ephemeris
1 Tap Start > Settings > the System tab.
2 Tap iGPS settings. The iGPS Settings screen appears.
3 Tap the Advanced tab.
4 Select the Enable extended ephemeris check box.
5 Tap ok.
Learning About Additional GPS Options for the CN3
Intermec provides enhanced feature support for the Extended Ephemeris
data capability. For the latest Extended Ephemeris data files and other CN3
downloads, visit the CN3 downloads page on the Intermec web site at
www.intermec.com. For more information about programming for
Extended Ephemeris GPS, visit the Intermec Developer Library at
www.intermec.com/idl.
Resetting Your Computer
When the CN3 completely stops responding, an application is locked up
and does not respond, when you upgrade the firmware, or when you reflash
the CN3, it may be necessary to perform a reset.
Preferred Reset Method
The recommended method for resetting the CN3 is to press and hold the
power button on the front of the CN3 for about 10 seconds. This performs
a graceful system shutdown and no data is lost in the process.
Secondary Reset Method
If performing the preferred reset method does not restore system operation,
it may be necessary to press the reset button inside the battery
compartment of the CN3. This method does not guarantee that cached
disk data will be saved, so transactional data may be lost during the reset.
All other data is preserved.
To Next Page
Loading...
