Chapter 5 — Network Support
174 CN3 Mobile Computer User’s Manual
Both files must have the same name for the appropriate private key to
associate with the correct certificate, such as admin.cer and admin.pvk. The
certificate files are deleted from the CN3 after they import to the store. If
there are no certificates to import, this action fails.
To import user certificates
1 Tap the <<< button next to the Certificate Path field to select the user
certificate (DER-encoded .cer file without the private key) to import.
2 Tap the <<< button next to the Key Path field to select the .pvk private
key that corresponds to the user certificate chosen in step 1.
3 Tap Import User Cert to install the selected certificate.
To obtain a user certificate
Tap Web Enrollment to obtain a user certificate over the network from an
IAS Server, then tap X to return to the Security page.
LEAP (Cisco Lightweight EAP)
LEAP is the Cisco Lightweight version of EAP.
Use “LEAP” to configure the use of LEAP as an authentication protocol,
select “Open,” “WPA,” “WPA2,” or “Network EAP” as an association
mode, or assign “Network EAP.”
To Next Page
Loading...
