Chapter 1 — Using the Computer
16 CS40 Mobile Computer User’s Manual
8 Install the battery. Press down firmly on the top of the battery, and
make sure that the battery release tab is fully engaged.
9 Press the Power button. The CS40 cold boots.
Transferring Files To and From Your PC
You can use Microsoft ActiveSync (Windows XP or earlier) or Windows
Mobile Device Center (Windows Vista or Windows 7) to establish a
connection between your CS40 and PC. After you connect to your PC,
you can transfer files, synchronize files, remotely debug, and perform
other device management activities. ActiveSync and Windows Mobile
Device Center are a free applications available from the Microsoft web
site at www.windowsmobile.com/getstarted.
To transfer files to and from your PC:
1 Connect your CS40 to your PC with the power and data y-cable
accessory.
2 Install Microsoft ActiveSync or Windows Mobile Device Center on
your PC.
To Next Page
Loading...
Need help?
General
