Chapter 7 — Configuring the Computer
72 CS40 Mobile Computer User’s Manual
Selecting a Funk Security Profile
You can define up to four Funk security profiles.
To select a Funk security profile:
1 Start Intermec Settings.
2 Choose Communications > 802.11 Radio > Funk Security.
3 Choose a profile. A list of configurable settings appears.
4 (Optional) In the Profile Label text box, enter a meaningful name
for your profile.
5 Configure your security settings. For help, see the next sections.
6 Repeat Steps 3 through 5 for each profile you want to define.
7 Set an active profile by choosing it in the Active Profile list.
8 Save your settings.
Configuring WPA or WPA2 Enterprise (802.1x) Security With
Funk
After you configure the communications and radio parameters on
your mobile computer and select Funk as your security choice, you can
configure WPA-802.1x or WPA2-802.1x security.
To configure WPA-802.1x or WPA2-802.1x security with Funk:
1 Start Intermec Settings.
2 Choose Communications > 802.11 Radio > Funk Security.
3 Select the profile you want to configure.
4 For Association, choose WPA or WPA2. Encryption
automatically defaults to TKIP or AES, respectively.
5 For 8021x, choose TTLS, PEAP, EAP-FAST, or TLS.
6 If you choose TTLS or PEAP:
a For Prompt for Credentials, choose Enter credentials now.
b Enter a User Name and User Password.
c For Validate Server Certificate, choose Yes.
To Next Page
Loading...
Need help?
General
