Chapter 5— Optimizing Printer Performance
3400, 3440, and 3600 Bar Code Label Printer User’s Manual 51
3XXXU.040
Label mark
sensor
(The label mark sensor
can be positioned no
more than 1" from the
inboard edge.)
Locate the label mark sensor
behind the platen roller near
the inboard edge of the printer.
Use your index finger to adjust
the label mark sensor.
Platen
roller
Inboard edge
of printer.
The platen roller
is not shown
for clarity only.
3 Enable mark printing with PrintSet, your third-party software, or IPL
commands. For help, see PrintSet online help, your third-party
documentation, or the IPL Programming Reference Manual (P/N
066396).
4 Print a few labels or press Feed/Pause two times to make sure that the
label mark sensor is detecting the black mark on the media.
5 Replace the media cover.
Using the Printer Memory Efficiently
To receive the best performance from your printer, you must understand
how to use the printer RAM. The following sections can help you
determine the most efficient way to use your printer memory. It is
important to remember that using a lot of available memory for storage
reduces the amount of memory used for imaging. The end result is a
decrease in printer performance.
To Next Page
Loading...
Need help?
General