Appendix A— Specifications
3400, 3440, and 3600 Bar Code Label Printer User’s Manual 71
Self-Strip
The self-strip rewinder hub can take up the backing of an entire 152-meter
(6,000-inch) roll of media.
Peel Release 10-50 grams
Note: For the 3400C and 3400D printer, self-strip printing is an option
that you order with your printer. Self-strip printing is standard on the
3400A and 3400B.
3400 Specifications
This section contains specifications for the 3400 A, B, C and D printers.
For information about the 3400e printer, see the EasyCoder 3400e Bar
Code Label Printer User’s Manual (P/N 071881).
Dimensions (No Options Installed)
Height 27.9 cm (11 in)
Width 26.7 cm (10.5 in)
Length 43.2 cm (17 in)
Weight 15.8 kg (35 lbs)
Character Sets
US ASCII Norwegian/Danish
UK ASCII Swedish/Finnish
German Italian
French Spanish
Swiss
Memory
Printer Memory
3400A Base 32K used for storage and image.
Optional 128K Expanded Memory EPROM
3400B Base 128K used for storage and image.
Optional 2 Meg Bitmapped Kanji / Katakana PCB card
6 Meg Bitmapped and Outline Kanji / Katakana PCB card
3400C Base 512K of DRAM
128K of SRAM, 60K default allocated for storage
Optional 512K of SRAM
2, 6, or 8 MB flash module
3400D Base 128K used for storage and image.
Optional 512K Expanded Memory EPROM
To Next Page
Loading...
Need help?
General