Intermec EasyCoder F4 User Manual

Intermec EasyCoder F4 – Installation & Operation Ed. 3 61
Chapter 8 Setup Mode
1
/. “Left”, “right”, “up”, and “down” refer to the overviews later
in this chapter.
Move up one level or scroll back in a stack
of options
1
.
Move one menu to the right on the same
level
1
.
Move one menu to the left on the same
level
1
.
Specify negative values (leading position)
Enter numeric values.
Exit the Setup Mode.
(Can be used anywhere in the Setup Mode.)
Clear erroneously entered values.
Acknowledge and move to next menu.
Perform testfeeds in the Testfeed menu.
Print test labels in the Test Label menu.
Move down one level or scroll forward in a
stack of options
1
.
Display error message at test label printing
failure.
-
Navigating in
Setup Mode
While going through the setup procedure, you are guided by texts
in the printer’s display. You can navigate between setup menus,
acknowledge displayed values, select or type new values, etc. by
using the keys on the printer’s keyboard.
Note!
An external keyboard cannot be used inside the Setup Mode.

Intermec EasyCoder F4 Specifications

General

Brand	Intermec
Model	EasyCoder F4
Category	Printer Accessories
Language	English