Intermec EasyCoder F4 - Selecting an Application

Intermec EasyCoder F4 – Installation & Operation Ed. 374
Chapter 9 Intermec Shell Startup Program
This example shows how you can select the Intermec Fingerprint
application:
----------------
SHELL
SEL. APPLICATION
----------------
(Y / N / B):Y
----------------
SEL. APPLICATION
CURRENT APPL.
----------------
(Y / N / B):N
----------------
SEL. APPLICATION
LABELSHOP
----------------
(Y / N / B):N
----------------
SEL. APPLICATION
WINDOWS DRIVER
----------------
(Y / N / B):N
----------------
SEL. APPLICATION
Fingerprint 7.40
----------------
(Y / N / B):Y
----------------
STD I/O CHANNEL
UART1
----------------
(Y / N / B):Y
When you have answered the fi nal prompt, the printer will start
the selected application.
Terminal Setup, cont.
Selecting an Application