22 Intermec EasyLAN Wireless Interface Kit—Installation Instructions
Chapter 3—Setup in Fingerprint
IP Address
If you have selected MANUAL as manual selection method, you can
assign a permanent IP Address to the printer:
SETUP"NETWORK,IP ADDRESS,nnn.nnn.nnn.nnn"
Netmask
If you have selected MANUAL as manual selection method, you can
specify a netmask for the printer:
SETUP"NETWORK,NETMASK,nnn.nnn.nnn.nnn"
Default Router
If you have selected MANUAL as manual selection method, you can
specify a default router for the printer:
SETUP"NETWORK,DEFAULT ROUTER,nnn.nnn.nnn.nnn"
Name Server
If you have selected MANUAL as manual selection method, you can
specify a name server for the printer:
SETUP"NETWORK,NAME-SERVER,nnn.nnn.nnn.nnn"
Finishing the Setup
You can now disconnect the printer from the PC and test the wireless
communication as described in Chapter 4, assuming that there is a
working wireless LAN and the printer is inside the coverage area of an
access point.
To Next Page
Loading...
