Chapter 3 — Configuring the Printer
88 PX4i and PX6i High Performance Printer User’s Manual
Use the following table to understand the mail settings.
Understanding the Mail Settings
Setting Description
Mail (SMTP)
Server
Choose a configuration method for your mail server
settings:
• SMTP settings from DHCP: Choose this setting if
you want the printer to receive settings
automatically from your DHCP server. This setting
requires that you choose DHCP and IP Selection in
the TCP/IP section.
• Manual settings: Choose this option to manually
configure the Mail Server address and port. The
default port is 25.
Mail addresses Defines the e-mail addresses to use when the printer
sends alert messages:
• From address: The address that displays as the
sender of alert messages. E-mail will be returned to
this address if the recipient is unreachable. To
prevent e-mail bounces when the recipient is
unreachable, leave this field empty.
• To address: The recipient of alert messages. To
enter several addresses, separate them with a comma
(,) or a semicolon (;).
To Next Page
Loading...
