Chapter 1 — Using the Printer
26 PX4i and PX6i High Performance Printer User’s Manual
• has a switch that prevents it from operating when it is in the open
position.
• can be fitted with an optional tray for collecting cutoff labels.
• requires the front door to be removed.
You can also install an optional label taken sensor so that the next
copy in the batch is not printed until the current copy is removed. For
more information, see “Accessories for the Printer” on page 155.
To load media for cut-off printing
1 Turn off the printer.
2 Open the cutter and media cover.
Warning: The cutting edge rotates when you turn on the power
and reboot the printer. Always keep the cutter in the closed
position during operation. Turn off the power or disconnect the
cutter before cleaning. Keep your fingers away from cutting
edges.
To Next Page
Loading...
