Intermec PX4i

Chapter 1 — Using the Printer
PX4i and PX6i High Performance Printer User’s Manual 47
5 Adjust the ribbon supply bobbin for your ribbon.
• If your ribbon is 55 to 60 mm (2.16 to 2.3 in) wide, compress
the ribbon supply bobbin and move it so it snaps into the first
(innermost) groove.
• If your ribbon is 88 to 90 mm (3.5 in) wide, compress the
ribbon supply bobbin and move it so it snaps into the second
groove.
55-60 mm
(2.1-2.3”)
80-90 mm
(3.5”)